CeLAN VBS (Vehicle Barrier System Control)
Module-EZ

Ce-VBS-EZ

The Ce-VBS-EZ Module provides a microprocessor based standalone vehicle barrier system control or a multi-barrier system when used with the Rampart Central Controller.  The module’s cost effective COTs design provides a simple to install barrier solution with unparalleled ease of use and security.

The Ce-VBS-EZ Module allows for barrier command and control while providing features designed to reduce the cost of operation by tracking numerous metrics of the system and reporting them to the Rampart Central Control System or local SD memory card.

Features:

• AES Encrypted CeLAN communications.
• Supervised digital inputs. The supervision of digital inputs is via 3K ohm EOL resistor
• Seven Form A relay outputs, One form A.
• 12 and 24 VDC outputs for control functions.
• Single encrypted CeLAN data port.
• Removable terminal strips ease of installation.
• Multi-level override vs. older master/slave setup.
• Supports HMI automation touchscreens, and manual buttons.

Specifications:

• CeLAN Vehicle Barrier System Module.
• Onboard 2 X16 LCD display for reviewing system metrics.
• Traffic light control.
• Transient protection on all inputs and outputs.
• Operational in a stand-alone or enterprise mode.
• Onboard SD Memory slot-8GB holds over 65,000,000 events.
• 5.7” Full color touchscreen control for standard operation, or manual button controller options.
• 15, 17” and 21” Computer touch screen options for central command centers.
• Input Power: 12 VDC nominal (10 VDC minimum, 14 VDC maximum), 300mA maximum (standby board only).
• Output Power: 24VDC or 12VDC.
• Input Supervision: 3.0K ohm resistor.
• Outputs: 7 Form A relays and 1 Form C relay rated at 10A @120VAC and 10A @ 30VDC.
• Board Dimensions:  6.5 (L) X 4.57 (W).
• Operating Temperature: 23° to 131° F (-5° to 55° C). Up to 140° F or 60° C under temporary conditions.
• Storage Temperature:   23° to 131° F (-5° to 55° C).
• Maximum Humidity: 90% relative humidity, non-condensing.

The Ce-VBS-EZ Module has an integrated 2 X 16 LCD display to allow for easy service review of over 60 different system metrics. These metrics can also be reviewed on the CeLAN AES Encrypted Receiver – VBS, or using the Rampart remote monitoring software.

• Manual EFO Button
• Manual EFO Reset
• Gate Arm
• Card Reader
• High/Low Pressure
• Traffic Safety 1
• Traffic Safety 2
• Manual Up Button
• Manual Down Button
• Limit Switch Secure
• Limit Switch Non-Secure
• Linear Position
• Fluid Level
• Hi/Lo Pressure
• Gate Arm
• Reader Valid
• Cylinder Heater Current
• Vehicle Barrier Inputs
• Vehicle Barrier Outputs
• EFO Valve Relay
• Non-Secure Valve Relay
• Secure Valve Relay
• Motor Run Relay
• Gate Arm
• Warning Horn Relay
• Traffic Light Red
• Traffic Light Amber
• Limit  UP Status Output
• Limit Down Status Output
• Manual Buttons
• Touch Screen
• Hydraulic Unit
• Safety Loops
• 12VDC input power from a power supply capable of supplying a minimum 5A.